Author Archives for kandpadmin
- March 18, 2025
- Not categorized
- Posted by kandpadmin
- Comments Off on 2152
Ensure grommets are seated in filter and lubed before installation.
Filter is designed to be just slightly smaller than factory to allow for variances in factory filter cavities.
Filter Number 2152 (No Longer Available)
MSRP USD: $88 Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in .647 2.4 1.268 Bypass mm 16.43 60.96 32.21
- March 18, 2025
- Not categorized
- Posted by kandpadmin
- Comments Off on S205
Ensure quad ring is fully seated in housing groove and lube with clean oil before installation.
Quad ring can normally be used for several oil changes.
Torque filter to either factory specs or 18-20 lb ft, whichever is less
Filter Number S205
MSRP USD
Finish Options:
Machine Finish (shown) = $439S205 PARTS LIST
Overall
Diameter
Overall
Length
- March 18, 2025
- Not categorized
- Posted by kandpadmin
- Comments Off on S209
Ensure quad ring is fully seated in housing groove and lube with clean oil before installation.
Quad ring can normally be used for several oil changes.
Torque filter to either factory specs or 18-20 lb ft, whichever is less
Filter Number S209
MSRP USD
Finish Options:
Machine Finish (shown) = $439S209 PARTS LIST
Overall
Diameter
Overall
Length
- March 18, 2025
- Not categorized
- Posted by kandpadmin
- Comments Off on S211
- Ensure quad ring is fully seated into housing groove then lube with clean oil before installation.
- Quad ring can normally be used for several oil changes.
- Torque filter to either factory specs or 18-20 lb ft, whichever is less


MSRP USD
Finish Options:
Machine Finish (shown) = $439S211 PARTS LIST
Housing Quad Ring QR3 Filter Element Retaining Spring FERS5 Gasket Plate Quad Ring QR4 Thread or IDOverall
Diameter
Overall
Length
- March 18, 2025
- Not categorized
- Posted by kandpadmin
- Comments Off on S210
Ensure quad ring is fully seated in housing groove and lube with clean oil before installation.
Quad ring can normally be used for several oil changes.
Torque filter to either factory specs or 18-20 lb ft, whichever is less
Filter Number S210
MSRP USD
Finish Options:
Machine Finish (shown) = $439S210 PARTS LIST
Overall
Diameter
Overall
Length
- March 18, 2025
- Not categorized
- Posted by kandpadmin
- Comments Off on FE101
Filter Element – FE101

(Note that this Filter Element does not come with the top threaded cap or the bottom cap)
MSRP USD $137
- March 18, 2025
- Not categorized
- Posted by kandpadmin
- Comments Off on 2147
Lube grommet with clean oil and make sure that the grommet is seated properly.
Filter is designed to be just slightly smaller than factory to allow for variances in factory filter cavities.
Filter Number 2147
MSRP USD: $80 Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in .427 1.9 1.65 Bypass mm 10.84 48.26 41.91
- March 18, 2025
- Not categorized
- Posted by kandpadmin
- Comments Off on S202
Ensure quad ring is fully seated in housing groove and lube with clean oil before installation.
Quad ring can normally be used for several oil changes.
Torque filter to either factory specs or 18-20 lb ft, whichever is less
Filter Number S202
MSRP USD
Finish Options:
Machine Finish (shown) = $439S202 PARTS LIST
Overall
Diameter
Overall
Length
- March 18, 2025
- Not categorized
- Posted by kandpadmin
- Comments Off on S112
Ensure quad ring is fully seated in housing groove and lube with clean oil before installation.
Quad ring can normally be used for several oil changes.
Torque filter to either factory specs or 18-20 lb ft, whichever is less
Filter Number S112
MSRP USD
Finish Options:
Machine Finish (shown) = $499S112 PARTS LIST
Overall
Diameter
Overall
Length





