Author Archive: kandpadmin

Quick Tips

Uses -6 AN Fitting

Filter Number S71

MSRP USD: $99 Cover O-Ring Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in .316 1.114 1.625 NA mm 8.02 28.29 41.27 NA

Quick Tips

Uses -4 AN Fitting

Filter Number S72

MSRP USD: $99 Cover O-Ring Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in .316 1.114 1.625 NA mm 8.02 28.29 41.27 NA

Quick Tips

Uses 1/8″ pipe thread

Filter Number S73

MSRP USD: $99 Cover O-Ring NA Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in .316 1.114 1.625 NA mm 8.02 28.29 41.27 NA

Quick Tips

Lube o-ring with clean oil.

Filter is designed to be just slightly smaller than factory to allow for variances in factory filter cavities.

Filter Number S76

MSRP USD: $119 Filter Element Retaining Spring FERS1 Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in 0.465 1.98 4.47 NA mm 11.81 50.34 113.59 NA

Quick Tips

Lube both o rings with clean oil and make sure that the filter element slides smoothly on the large bolt coming through the filter element cover prior to installation on the engine. Filter is designed to be just slightly smaller than factory to allow for variances in factory filter cavities.

Filter Number S78

MSRP USD: $149 Cover O-Ring Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in 1.74 3.23 4.14 1.74 mm 44.19 84.04 105.15 44.19

Quick Tips

Lube both o rings with clean oil and make sure that the filter element slides smoothly on the large bolt coming through the filter element cover prior to installation on the engine. Filter is designed to be just slightly smaller than factory to allow for variances in factory filter cavities.

Filter Number S81

MSRP USD: $91 Cover O-Ring NA Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in .965 2.2 4 .965 mm 24.51 55.88 101.6 24.51

Quick Tips

Lube both o rings with clean oil and make sure that the filter element slides smoothly on the large bolt coming through the filter element cover prior to installation on the engine. Filter is designed to be just slightly smaller than factory to allow for variances in factory filter cavities.

Filter Number S90

MSRP USD: $129 Cover O-Ring -237 Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in 1.24 2.81 3.71 1.24 mm 31.49 71.37 94.23 31.49

Quick Tips

Ensure quad ring is fully seated in housing groove and lube with clean oil before installation.

Quad ring can normally be used for several oil changes.

Torque filter to either factory specs or 18-20 lb ft, whichever is less

Filter Number S101

  MSRP USD

Finish Options:

Machine Finish (shown) = $499    

S101 PARTS LIST

Housing Quad Ring -345 Filter Element Retaining Spring FERS5 Thread or ID

Overall
Diameter

Overall
Length

Quad Ring OD (For Housing) in 1 1/2 x 16 4.75 9.5 4.37 mm 120.65 241.3 110.99

Quick Tips

Ensure quad ring is fully seated in housing groove and lube with clean oil before installation.

Quad ring can normally be used for several oil changes.

Torque filter to either factory specs or 18-20 lb ft, whichever is less

Filter Number S102

  MSRP USD

Finish Options:

Machine Finish (shown) = $499    

S102 PARTS LIST

Housing Quad Ring -345 Filter Element Retaining Spring FERS5 Thread or ID

Overall
Diameter

Overall
Length

Quad Ring OD (For Housing) in 1 1/2 x 12 4.75 9.5 4.37 mm 120.65 241.3 110.99