Author Archive: kandpadmin

Gasket Plate for S41, S51, S451, S201

Replacement Gasket Plate comes with one Quad Ring (QR-4) installed.

Gasket Plate for S41, S51, S451, S201

  MSRP USD: $29.00

 

Gasket Plate for the S53 filter.

Replacement Gasket Plate comes with one Quad Ring (QR-6) installed.

Gasket Plate for S53

  MSRP USD: $39.00

 

Gasket Plate for the S19 filter.

Replacement Gasket Plate comes with one Quad Ring (QR-5) installed.

Note that newer FE-19’s from K&P Engineering no longer have the o-ring for the gasket plate. And are not necessary.

Gasket Plate for S19

  MSRP USD: $39.00

 

 

• Lube any O-rings with clean oil.
• Filter is designed to be just slightly smaller than factory to allow for variances in factory filter cavities.

Filter Number S77 (While Supplies Last)

MSRP USD: $79  $71.10 Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in 0.688 1.982 2.238 Bypass mm 17.475 50.343 56.845

Quick Tips

Lube both o rings with clean oil and make sure that the filter element slides smoothly on the large bolt coming through the filter element cover prior to installation on the engine. Filter is designed to be just slightly smaller than factory to allow for variances in factory filter cavities.

Filter Number S87

MSRP USD: $129 Cover O-Ring Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in mm

FE-45 (Filter Element 45) Fits into C3 Housings

Replacement Filter Element for the S45 Filter

FE-45

11/16 x 16 Thread MSRP USD: $109.00

Quick Tips

 

Ensure quad ring is fully seated in housing groove and lube with clean oil before installation. Quad ring can normally be used for several oil changes.

Included cup wrench fits over machined flats on bottom cooling fin.

Torque filter to either factory specs or 18-20 lb ft, whichever is less

Filter Number S45

Thread or ID Overall Diameter Overall Length Quad Ring OD in 11/16 x 16  2.9  3.4 2.75 mm  73.6  86.3  69.85 MSRP USD:

Finish Options:
Machine Finish (shown) =$189
Anodized Black=$199
Anodized Grey=$199
Anodized Buffed Edges =$208
Polished =$238
Chrome =$238

S45 PARTS LIST

Housing C3 Quad Ring QR2 Filter Element FE45 Filter Element Retaining Spring FERS1 Cup Wrench CW1

 

• Lube all o-rings with clean oil.
• Filter is designed to be just slightly smaller than factory to allow for variances in factory filter cavities.

Filter Number S65 (While Supplies Last)

MSRP USD: $159  $143.10

 

Cover O-Ring -236 Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in 0.612 2.81 4.085 1.385 mm 15.545 71.37 103.75 35.179