Author Archive: kandpadmin

 

• Lube all o-rings with clean oil.
• Filter is designed to be just slightly smaller than factory to allow for variances in factory filter cavities.

Filter Number S65 (While Supplies Last)

MSRP USD: $159  $143.10

 

Cover O-Ring -236 Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in 0.612 2.81 4.085 1.385 mm 15.545 71.37 103.75 35.179

Quick Tips

Ensure quad ring is fully seated in housing groove and lube with clean oil before installation.

Quad ring can normally be used for several oil changes.

Torque filter to either factory specs or 18-20 lb ft, whichever is less

Filter Number S230

 

  MSRP USD:

Finish Options:

Machine Finish (shown) = $199 Black Anodized = $209  

S230 PARTS LIST

Housing C10 Housing Quad Ring QR2 Filter Element FE30 Filter Element Retaining Spring FERS1 Machined Nut 1″ Drain Plug Thread 7/16 – 20 x 3/8 *** Drain Plug Sourced by the Customer Thread or ID

Overall
Diameter

Overall
Length

Quad Ring OD (For Housing) in 20mm x 1.5 2.925 3.73 2.75 mm 74.29 94.74 [...]

FE-451 (Filter Element 451) Fits into C6 Housings

Replacement Filter Element for the S451 Filter

FE-451

1″ x 16 Thread MSRP USD: $209.00

Quick Tips

Ensure grommet is seated in filter and lubed prior to installation

Filter Number 2163

MSRP USD: $89 Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in .75 2.70 1.76 .75 mm 19 68.5 45 19

QR-10 (Quad Ring 10)

Replacement Quad Ring for K&P Engineering Filters:

S501, S502

QR-10

  MSRP USD: $3.50

 

Lube both o rings with clean oil.

Filter is designed to be just slightly smaller than factory to allow for variances in factory filter cavities.

Filter Number S96

MSRP USD: $139 Cover O-Ring -235 Thread or ID Overall Diameter Overall Length Bypass, Closed End or I.D. in 1.095 2.72 3.2 1.095 mm 27.813 69.088 81.28 27.813

Threaded Fitting 3/4 x 16 on both ends with a shoulder in the middle.

Can be used in Filter Elements that have the 3/4×16 thread pitch for custom applications that require a male 3/4×16 thread. Threaded Fitting 3/4×16 X 3/4×16

  MSRP USD: $24.99

FE-59 (Filter Element 59) Fits into C1 Housings

Replacement Filter Element for the S59 Filter

FE-59 (While Supplies Last)

3/4 x 20 Thread MSRP USD: $99.00 $89.10

Ensure quad ring is fully seated in housing groove and lube with clean oil before installation.

Quad ring can normally be used for several oil changes.

Included cup wrench fits over machined flats on bottom cooling fin.

Torque filter to either factory specs or 18-20 lb ft, whichever is less

Filter Number S59 (Available While Supplies Last)

  MSRP USD

Finish Options:

Machine Finish (shown) = $169    

S59 PARTS LIST

Housing C1 Housing Quad Ring QR1 Filter Element FE59 Filter Element Retaining Spring FERS1 Cup Wrench CW1 Thread or ID

Overall
Diameter

Overall
Length

Quad Ring OD (For Housing) in 3/4 x 20 2.71 2.79 2.5 mm 68.83 70.86 63.5